4′ x 4′ Orthorout CNC Router

3-axis moving bridge; Includes 4′ x 4′  Phenolic table w/Ortho-Matrix vacuum plenum, in/out plugs, and mounting for the flip fixture. (2 -Zone)

Base Price:
$38,565

  1. 3-Axis moving bridge

    Includes 4′ x 4′  Phenolic table w/ Ortho-Matrix 2-Zone vacuum plenum, in/out plugs, and mounting for the flip fixture.

  2. 7 inch Z-axis
  3. 5 HP ES915L ISO30 Quick Change Spindle for Automatic Tool Changing
  4. 8-Position Auto Tool Change Rack including Tool Height Sensor
  5. Fagor 8037 Controller with Color Monitor
  6. Ethernet TCP/IP, USB and Serial Port Connections
  7. Fagor Industrial AC Servo Motors and Amplifiers on all axes
  8. Lead Screw drive assembly on all axes
  9. 220 Volt 3-phase power, 30 amps required
  10. Dust Collection Hood for Spindle (*Does not include Dust Collector)
  11. 1 Year Limited Warranty & Basic Phone Support
  1. HSD ES915L – 5 HP
    ISO-30 Type Push-Button, Quick-Change/ATC Spindle, (QEFC)

  1. Dust Collection Options:
    Dust Collection Delivery System (Dust Collector NOT Included)
    Dust Collection Delivery System (Includes Dust Collector)
  2. Productivity Add-Ons:
    Safety Options For CE, CSA or ETL:
    Safety Shroud
    Safety Mat (Located in front of workspace 30D x 72W)
    Single Beam Light Curtains (On each Side Long Axis)
    Safety Compliance for CE, CSA, or ETL
    CE Certification
  3. Spindle Options & Accessories:
    Tangential Oscillating Knife
  4. Tool Change Rack & Holders:
    Auto Tool Height Sensor (sets tool zero automatically)
    1″ Risers – increases bridge clearance to 9″, Z stroke remains 7″
    2″ Risers – increases bridge clearance to 10″, Z stroke remains 7″
    3″ Risers – increases bridge clearance to 11″, Z stroke remains 7″
    Tool Holder Set: 4 (Four) ISO-30 Tool Holders with Collet, Cover-Nut & Tightening Fixture.
    Tool Holder Set: 8 (Eight) ISO-30 Tool Holders with Collet, Cover-Nut & Tightening Fixture.
    Material Thickness Sensor
  5. Training & Technical Support Service:
    3-Day On-Site Machine Setup & Training Including Expenses
    On-Site Machine Setup & Training within 100 miles of Factory Including Expenses
    Factory Training for First Person
    Custom Consulting Rate (1 Hour Minimum)
    Technical Phone Support (1 Hour Minimum)
    Factory Training for Each Additional Person
  6. Utility Options & Accessories:
    Air Pressure Booster (required if compressed air supply is less than 90PSI)
  1. 5 HP Becker KVT 3.80

    48ACFM, 220V, Single Phase, 60 Hz

  2. 5 HP Becker KVT
    3.100, 69 ACFM, 208, 200V, 460 Three Phase, 60 Hz
  3. 8.6 HP Becker VTLF 2.250

    169 ACFM, 208, 220V, 460 Three Phase, 60 Hz

  4. 3″ Automatic 2-way Gate Valve
    (1 per machine)

  5. Low Pressure Vacuum (LPV) Switch
    (Price per Valve)

  1. Controller Options & Accessories
    1. Fagor Component Extended Warranty (From 1yr to 2yrs)
    2. 
    Upgrade From Incremental Encoders to Absolute Encoders on All Axes
  2. Utility Options & Accessories
    1. Convert to 220 Volt Single Phase Power (Requires Special Inverter & Wiring)
    2. Air Pressure Booster (Required if compressed air supply is less than 90PSI)

  3. Dust Collection Options & Accessories
    1. Dust collection delivery system (4×4 machines  -  *Dust Collector NOT INCLUDED)
    2. Dust collection delivery system (4×8 machines  -  *Dust Collector NOT INCLUDED)

  4. Safety Options For Regional Compliance
    1. 
    Safety Shroud
    2. Safety Mat (Located in front of Workspace 30D x 72W)
    3. 
    Single Beam Light Curtains (On each Side Long Axis)
    4. CE Certification
    5. ETL (US) & CSA (CAN) Field Evaluations

  5. Setup, Training & Technical Support Services
    1. 3-Day On-Site Machine Setup & Training Including Expenses
    2. On-Site Machine Setup & Training within 100 miles of Factory Including Expenses
    3. Factory Training for First Person
    4. Factory Training for Each Additional Person
    5. Custom Consulting Rate
    6. Technical Phone Support

     

Brian with Freedom Machine Tool proved to be a very knowledgeable CNC machinist and an excellent trainer. He strictly walked us through the training regimen while giving us insight into the great potential of Orthorout both within and outside the orthotics industry. The training manual and ancillary notes were incredibly useful not only and training but as reference point after he left. This helped us at Soley Orthotics to better understand the machine's operations and thus our operation of it.
– Brian Raynor // Owner, Soley Orthotics
Prior to purchasing this machine, I had searched for over 2 years for a small format CNC machine that had an automatic tool changer and an easy to use on-board tool height adjustment feature. How nice not to have to use a probe to set the tool height when changing cutters. It has some of the same features found on machines costing over twice the cost. We needed to find a machine with a small footprint, since we have limited space in our facility. I am pleased to say that this machine has operated flawlessly since day 1. Freedom Machine Tool's dedication to quality and customer service is unsurpassed. Even with our current economic conditions, this machine has allowed us to expand and grow our business with new and innovative products.
– Terry School // Owner, Davis-Whitehall
Freedom Machine Tool’s CNC tech, Brian, broke down our machine to make it easy to understand and to operate. He was very patient yet wasted no time getting us up and going, and confident in the operation of our cutter.
– Ben Belcha // Owner, Sky Prosthetics & Ace Ortho Solutions
Based on my research, on conversations with their excellent staff, and with other Freedom Machine Tool customer, my expectations were very high on delivery day. The machine has managed to exceed those expectations. I could not be happier with my decision to buy a Freedom Machine Tool CNC Router. If I had to do it all over again, but had another $20,000 in my budget, I would have bought the exact same machine.
– Dan Ritts // Owner, Allen Woodworking
I searched for two years before going despondent about what CNC router to buy. After kicking the tires on the Freedom Machine Tool CNC, I realized there was no comparison to other CNC routers in this price range. Long story short, I'm in CNC heaven with only my imagination being the limiting factor.
– Scott Rodenhizer // Newpixel LLC
Just had to let you know that I cut about 18 sheets of material yesterday and set a new shop record for number of cabinets built in one day. Your machine was flawless, unbelievable! Thanks so much.
– Joel Cassidy // Owner, J.C. Custom Woodworking

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

FAQs

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

As an OEM, we believe that the more you’re able to produce on a machine in-house, the more control you have over the machine’s reliability and stability. By manufacturing and servicing our machines at our headquarter facility in Colorado Springs we have optimal quality control. The people who build Freedom Machine Tool CNC Routers know what works, they know what doesn’t, meaning that our machines have been tried, tested and improved upon for accuracy and reliability. And because we built it, we know all the ins-and-outs of supporting it.

Other Routers

  • Patriot 4x4 4x4-1 View
  • Patriot 4x8 4x8-2 View
  • Patriot 4x8 with Lathe 4x8-lathe-3 View
  • Patriot 5x10 5x10-3 View
  • Orthorout 4x8 orthorout-1 View