|
--Back to Routers--
Base Machine Configuration:
- 3-Axis, moving gantry design with a 4' x 2' work area
- Welded steel tube, angle and plate framework, precision machined, drilled and tapped to accept a 4' x 2' table option from Freedom Machine Tool (FMT) or one produced by the customer
- Z-Axis tool plate with a 7”, servo driven, vertical stroke, ready to accept a spindle option from FMT, or it can be configured by the customer
- FAGOR 8035 Industrial CNC control with color CRT, 256K eeprom memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.
- 25mm precision, profiled rails with recirculating bearing blocks on all axes
- Precision ball-screw with anti-backlash ball-nuts on all axes
(25mm on X & Y, 20mm on Z).
- Industrial quality brush-less AC servo motors and matching servo amplifiers on all axes.
- 220v, 3-phase, 60 hz power. 30 amps required
Spindle Options:
- Mounting plate and electrical connection for customer provided PORTER CABLE router.
- HSD - 5 HP, wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut. The spindle is electric fan cooled for quiet operation.
- HSD - 9 HP, wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut. The spindle is electric fan cooled for quiet operation.
- HSD 915 - 5 HP, continuous duty (6.2 HP at 60% duty, 36 minutes per hour), push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM. Requires the “tool rack” option to be a fully automatic tool change machine. Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches. The spindle is electric fan cooled for quiet operation.
- HSD 919 - 11 HP, continuous duty, push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM. Requires the “tool rack” option to be a fully automatic tool change machine. Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches. The spindle is electric fan cooled for quiet operation.
Table Options:
- 4' x 2' Phenolic table top machined flat
- 4' x 2' Phenolic table top machined flat with 3/8" steel helicoil inserts on 10" centers
- 4' x 2' Aluminum T-slot table
- 4' x 2' Single Zone, phenolic vacuum plenum with manual control
Optional Accessories:
- 6-Position tool rack (must be combined with an ATC spindle) for fully automatic tool change capabilities.
- Automatic tool height sensor (available with all spindle options). Uses the 6th position on the tool rack. The fully automatic tool change machine becomes 5-position.
- Tool holder set: Four ISO-30 tool holders with collet & cover-nut and tightening fixture.
- Dust hood for point-of-generation chip collection. 5” port requires a minumum 1,000 cfm dust collector hook-up. Dust collector not included.
- Piping package with 6" quick connect metal pipe and 5" flex hose kit for easy dust collector connection (dust hood required).
- Complete dust collection solution with piping package and 2 HP dust collector (dust hood required).
- Hand-held teach pendant on umbilical cord with axis select and jog hand-wheel.
- Ethernet card with standard TCP/IP protocol for easy connection to your network.
- M04 counter clockwise spindle rotation for use with left handed tools and to overcome blow-out problems when machining hard-woods.
- Unist “Uni-Max” coolant system with M-code programmable on/off control, and single or multiple nozzles for cutting non-ferrous metals requiring lubrication. Dust hood must be removed while using this system.
- 1” bridge spacers installed to increase bridge clearance to 9”. Z-axis stroke remains 7”. Shorter cutting tools may not be able to reach standard table heights with this option.
- 2” bridge spacers installed to increase bridge clearance to 10”. Z-axis stroke remains 7”. Shorter cutting tools may not be able to reach standard table heights with this option.
- 3” bridge spacers installed to increase bridge clearance to 11”. Z-axis stroke remains 7”. Shorter cutting tools may not be able to reach standard table heights with this option.
Vacuum Pumps:
- 5 HP Becker KVT 3.80, 48ACFM, 220V, Single Phase, 60 Hz
- 5 HP Becker KVT, 3.100, 69 ACFM, 208, 200V, 460 Three Phase, 60 Hz
- 8.6 HP Becker VTLF 2.250, 169 ACFM, 208, 220V, 460 Three Phase, 60 Hz
- 10 HP Travaini EVO-10, 145 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 30 amps required. Great for sealed fixture and porous-plenum applications.
Note: Please call for custom configurations, and different software and vacuum options.
|
Products 
